Network Remote Woofer
Mar/100
Is this an good amp for my system? I detailed it all, thanks tons for your help, is this a decent system?
The details are:
# 4x100W+2x250W RMS at 4 Ohms
# 4x250W+2x500W MAX at 4 Ohms
# 2x400W+1x900W MAX at 4 Ohms Bridged
# 4x175W+1x400W RMS at 2 Ohms
# Electronic Crossover Network
# Bass Boost Circuit
# Bridgeable at 4 Ohms
# 2 Ohm Stereo Stable
# Tri-Mode Capable
# Gold Plated RCA Inputs
# Line Outs for 1 and 2 Channel
# Low Pass Filter Control
# High Pass Filter Control
# Remote Bass Level Control
# Power and Protection LED Indicators
# Red Lighting Illumination
# Side Leg Mounting
# THD: <0.04%.
# S/N Ratio: >90dB
# Input Sensitivity : 100mV ~4V
# Channel Separation : >65dB
# Freq. Response : 10Hz ~ 30KHz
# Patent Pending
# Soft Turn-on/Turn-off
# Dimensions : 8.6''(W) x 2.74''(H) x 19.7''(L)
I have 2- 5.25"----200 Watts (Each) 400 Watts total RMS
2-6X9--------------- 350 Watts (Each) 700 watts total RMS
2-10inch Sub woofers---max power=750 watts, RMS= 150 RMS watts
Voice coil diameter: 2"
4ohm inpedance
It sounds like a good amp for the sub. the only thing I would say is to stay a way from 4 chanle amps unless you are going to run 4 speakers off of it and your not reallly going to want to run 4 subs off that amp, get another amp to power the subs and use the amp you list on your 5.25" and 6"x9" and what kind to 6x9s are 350w rms
More Info: